|Get the Scratches Out||| Print ||
|Thursday, 25 October 2012 14:24|
By Samantha Mazzotta
Special to the Times
Glazed ceramic tiles are tough and resistant to most of the wear and tear that happens in high-traffic areas, but they can still become scratched or dull over time.
If the scratches are minor (they mark the finish but don’t go through the color glaze), it’s possible to polish them out.
First, clean and mop the floor so that you have a clear, debris-free surface to work on. Next, starting with the first scratched tile, apply a small amount of brass cleaner/polish to the scratch with a lint-free cloth, rubbing in circles. Let the polish dry, then buff away. If you don’t have brass cleaner, use toothpaste or baking soda.
To temporarily protect the tile surface, apply a bit of car wax — a plain paste wax, not cleaner wax, which has an abrasive in it.
Tiles that have been scratched too deeply to buff out or that are cracked or broken should be replaced. Locate extra tiles, if you have them, or purchase matching replacement tile (you may need to take a piece of the damaged tile to match the color).
Use a grout saw to carefully cut away the grout around the edges of the damaged tile. This creates a little wiggle room to loosen it without damaging surrounding tiles. Next, using a hammer and small chisel, gently tap the tile loose. (Place the chisel on or near the damage rather than at the edge of the tile where other tile might be damaged.) It’s OK if the damaged tile chips or cracks — save it to do your color match.
Once the tile is removed, brush or cut away debris or loose adhesive. Fit the new tile into the open space; if the tile fits correctly, apply a coat of tile adhesive to the back and fix it so that the spacing between the tile’s edges and the edges of the other tiles is even. Let the adhesive dry completely, and then fill in with grout that matches the color of the existing grout.
© 2012 King Features Synd., Inc.